Bases & Nicotine Shots for Mixing: Guide for DIY Mixers





Bases & nicotine shots for mixing give you complete control over the flavour, nicotine strength, and vapour behaviour of your liquid when vaping. Instead of committing to pre-made blends, you can put together your own e-liquid tailored precisely to your device and preferences. In this guide, you will learn straight away what matters when it comes to VG/PG ratios, dosage, and choosing the right flavours.
Key Takeaways at a Glance
- When mixing your own e-liquid, you combine a flavourless base, a concentrated flavouring, and, if desired, a nicotine shot in the right ratio.
- A 50/50 VG/PG base is ideal for pod systems and MTL atomisers, while 70/30 blends produce denser vapour for sub-ohm devices.
- One 10 ml nicotine shot at 20 mg/ml results in an exact nicotine strength of 2 mg/ml in a 100 ml total volume.
- Fruit and menthol flavours are often ready to use immediately after shaking, whereas vanilla and tobacco flavours benefit from a few days of steeping time.
What Is Behind E-Liquid Base, Nicotine Shot, and Flavour?
When mixing your own e-liquid, a flavourless liquid base, a concentrated flavour, and optionally a nicotine shot form the three core building blocks.
The foundation is always a nicotine-free base made of vegetable glycerine (VG) and propylene glycol (PG). It makes up the largest portion of the liquid in your bottle and later carries both the flavour and the vapour. If you vape without nicotine, you only need such an e-liquid base and your chosen flavour concentrate. However, if you want nicotine in your blend, a nicotine shot comes into play. This is a compact 10 ml bottle that is also based on VG and PG, but enriched with nicotine.
The third component is the flavour concentrate. Since flavours are highly concentrated, they must never be put into the tank neat, but are instead mixed in small proportions into the base. A clean, flavour-neutral foundation such as the Ultrabio 100 ml 50/50 Base ensures that the flavour can unfold purely without any unwanted aftertaste.
Comparing VG/PG Bases: Should You Choose 50/50 or 70/30?
The mixing ratio of a VG/PG base determines the viscosity of your e-liquid and defines which type of e-cigarette it is technically suited for.
The two main ingredients fulfil different roles in the atomiser. Propylene glycol (PG) has a thin consistency and acts as a clear flavour carrier, while providing a noticeable throat hit when inhaling. Vegetable glycerine (VG), on the other hand, is significantly thicker, has a naturally mild sweetness, and produces visible, dense clouds of vapour. Depending on which coil head you use, you should opt for one of the two standard ratios.
50/50 Base for Pod Systems and MTL Atomisers
A balanced 50/50 blend contains equal parts VG and PG, allowing it to flow easily through fine liquid ports. That is precisely why this Ultrabio base is the first choice for compact pod systems and classic MTL (Mouth-to-Lung) devices. The cotton inside the coil absorbs the thinner mixture quickly, keeping e-liquid wicking steady even during short, frequent draws.
70/30 Base for Sub-Ohm and DL Devices
A base with 70% VG and 30% PG is noticeably thicker and is designed for high-powered sub-ohm atomisers with large wicking channels. With an open draw style (Direct-to-Lung), the higher VG content delivers denser vapour and a smoother inhale. You should avoid 70/30 in small pod systems, as the cotton there often cannot absorb thicker blends fast enough. It is also important to pick the same ratio when buying nicotine shots: the Ultrabio 20mg/ml 50/50 Nicotine Shot matches a balanced mixture, while open DL setups stay at their intended ratio with the Ultrabio 20mg/ml 70/30 Nicotine Shot.
Matching Products from Our Shop
Buying and Dosing Nicotine Shots Correctly: The Quick Calculator
With a 20 mg nicotine shot, you control your desired nicotine strength precisely via the ratio to the total amount of liquid in your mixing bottle.
A standard shot contains a concentration of 20 mg/ml across a 10 ml volume, which equals 200 mg of nicotine in total per bottle. To calculate your target strength, simply divide this total amount of nicotine by the finished total volume of your e-liquid. This keeps you flexible with every batch and helps avoid dosing errors.
- 2 mg/ml nicotine: Add 1 nicotine shot (10 ml) to your mixing bottle and top up with flavour and base to a total volume of 100 ml.
- 4 mg/ml nicotine: Use 2 nicotine shots (20 ml) and fill the remainder up to 100 ml with flavour and base.
- 6 mg/ml nicotine: Combine 3 nicotine shots (30 ml) with your flavour and top up with base to 100 ml.
- Higher strengths for MTL: For 10 mg/ml in 100 ml, mix 5 shots (50 ml) with flavour and the remaining 50 ml volume of base.
When calculating, remember that the flavouring is also part of the total volume. For example, if you mix 100 ml of finished liquid with 5% flavour, the 100 ml consists of 5 ml of flavour, the chosen number of shots, and the remaining balance of nicotine-free base. A flavourless shot alters neither the colour nor the taste profile of your aroma.
Choosing a Flavour Concentrate: From Tobacco to Menthol and Vanilla
A high-quality flavour concentrate gives character to your neutral blend and is usually added to the base at a few percent depending on the manufacturer's instructions.
Anyone looking for clear, reliable directions when mixing their own e-liquid flavours is best served by sticking to proven classics rather than overloaded experiments. An established standard in everyday DIY mixing is the Ultrabio flavour range, as its profiles are cleanly balanced and easy to dose accurately. Depending on your taste preferences, completely different flavour profiles are available to you.
If you prefer a classic tobacco e-liquid flavour, it comes down to the nuance between dry, spicy, and mild. Ultrabio American Blend Flavour stands as a typical American blend aroma offering a rich, well-rounded mix. Those seeking a gentler tobacco liquid flavour tend to reach for Ultrabio Virginia Mild Flavour with its subtle note, or opt for a slightly fuller expression with Ultrabio Virginia Blend Flavour.
Alongside tobacco profiles, freshness and subtle sweetness are staples of DIY mixing. A crisp menthol flavour like Ultrabio Fresh Menthol Flavour delivers a direct, cooling note and is also great for freshening up other blends. For warm, creamy profiles, a vanilla flavour is ideal: Ultrabio Vanilla Flavour brings a smooth sweetness that works wonderfully both on its own and paired with tobacco notes.
Step-by-Step Guide: How to Mix E-Liquid Successfully
For clean e-liquid mixing, pour the flavour and nicotine shots into a clean empty bottle first, then fill the remaining space with base.
Following a set order saves time and prevents running out of room in the bottle or getting the ratio wrong. Work on a wipeable surface and consistently keep all ingredients out of reach of children and pets, as these products are strictly intended for adults aged 18 and over.
- 1. Prepare your bottle and recipe: Set out a clean dosing bottle with measurement markings or a dropper tip and briefly note the millilitres needed for flavour, shots, and base.
- 2. Measure the flavour precisely: Pour the flavour concentrate into the bottle first according to the dosage recommendation on the label. For instance, if the recommendation is 5% for 100 ml, that equals 5 ml of flavour.
- 3. Add the nicotine shots: Next, add the calculated number of shots into the bottle.
- 4. Top up with base: Pour in the remaining amount of liquid base up to the target mark.
- 5. Shake vigorously and let steep: Seal the bottle tightly and shake it thoroughly for about one minute until all streaks have completely blended together.
After shaking, the flavour category determines the waiting time. Crisp profiles like menthol bond very quickly with the base and can usually be vaped shortly after mixing. More complex notes such as tobacco or vanilla often round out fully only after a few days in a dark cupboard, as the molecules distribute more evenly throughout the VG/PG base over time.
Frequently Asked Questions
Can you vape a nicotine-free base pure without any flavour?
Yes, a flavourless base can generally be vaped on its own without flavouring. It will taste very neutral to slightly sweet due to the glycerine it contains. Many DIY mixers use this option in between batches when they want a break from intense flavours.
Why should the nicotine shot match the VG/PG base?
When the nicotine shot has the same mixing ratio as your base, the viscosity of your finished e-liquid remains stable. If you mix several 50/50 shots into a 70/30 base, the overall blend becomes thinner than your sub-ohm atomiser may require.
How long does homemade e-liquid need to steep?
The steeping time depends on the flavour concentrate used. Simple menthol or fruit blends are often ready right after a thorough shake, whereas vanilla and tobacco flavours frequently need three to seven days of resting time to reveal their full profile.
How should I store bases, nicotine shots, and flavours properly?
Store all components in a cool, dry place protected from direct sunlight, ideally inside a closed cupboard. Light and heat cause nicotine to darken faster and can weaken delicate flavours over time. Always ensure child-resistant storage as well.
Last updated: November 2026 · Author: Popy



