E-Liquid Mixing Basics: How to Mix Your Own E-Liquid Step by Step

Mixing your own e-liquid saves money and gives you full control over flavour and vapour. Learn all the essentials clearly and concisely right here.
E-Liquid Mixing Basics: How to Mix Your Own E-Liquid Step by Step
Ultrabio 100ml 50/50 BasePOPY VAPES Base 100ml 50/50Ultrabio 20mg/ml 50/50 Nicotine ShotUltrabio 20mg/ml 70/30 Nicotine Shot

Understanding the basics of mixing e-liquid gives you complete control over vapour volume, viscosity, and flavour intensity for your setup. By skipping pre-mixed bottles and crafting your own blends, you can tailor every detail to your hardware and personal taste. At the same time, DIY mixing frees you from rigid industry formulas. With pure ingredients, reliable accessories, and a clear grasp of ratios, getting started is straightforward with no guesswork required.

Key Takeaways

  • Mixing your own e-liquid requires just three components: e-liquid base (VG/PG), flavour concentrate, and nicotine shots if desired.
  • The ratio of VG to PG determines the balance between vapour production, flow rate, and flavour intensity.
  • Your target nicotine strength can be calculated precisely from the volume of shots relative to the total batch size.
  • After thorough shaking, many blends require steeping time so the flavour molecules can distribute evenly.

What Is E-Liquid Made Of? The Three Core Components

A homemade e-liquid consists of a VG/PG base, highly concentrated flavouring, and optional nicotine shots. Each component serves a specific purpose in your tank, which is why it helps to understand their properties.

The largest share by volume is a neutral carrier liquid such as POPY VAPES Base 100ml 50/50 or another unflavoured base. This carrier liquid is made up of two substances: Vegetable Glycerin (VG) creates dense vapour clouds and has a thicker consistency, while Propylene Glycol (PG) is significantly thinner, carries flavour compounds efficiently, and delivers the desired throat hit.

E-liquid flavour concentrates are potent raw ingredients that must never be vaped neat. They are typically mixed at percentages between 2% and 15%, depending on the manufacturer's recommendation and the flavour profile. If you vape nicotine-free, simply combine a nicotine-free base with your flavouring. If you want nicotine in your blend, use standardised nicotine shots with a maximum concentration of 20 mg/ml.

Choosing the Right VG/PG Ratio: 50/50 Base vs. 70/30

The ideal mixing ratio depends on your atomiser type: a 50/50 base suits compact MTL pod systems, whereas 70/30 is designed for airy DL sub-ohm tanks. The viscosity of the carrier liquid determines whether e-liquid wicks smoothly to the coil.

A balanced ratio of 50% VG and 50% PG, such as Ultrabio 100ml 50/50 Base, wicks quickly and reliably. In small pod systems and classic Mouth-to-Lung (MTL) tanks, the coil's wicking ports are often quite narrow. An overly thick liquid can lead to dry hits and burnt coils. At the same time, the higher PG content enhances flavour clarity at moderate wattages.

For Direct-to-Lung (DL) vaping at higher wattages, a thicker blend like Ultrabio 100ml 70/30 Base is recommended. With 70% VG, your VG/PG base produces large, dense clouds of vapour and handles higher power output comfortably. Sub-ohm tanks feature wide juice channels, allowing thicker 100ml 70/30 base liquids to saturate the cotton without wicking issues.

Dosing Nicotine Strength Precisely: Classic Shot or Nicotine Salt?

You control nicotine strength by the number of shots you factor into the final total volume of your blend. Because regulations limit bottle size to 10 ml and strength to 20 mg/ml, every target strength requires a quick calculation.

For example, if you want to mix 100 ml of e-liquid at a target strength of 3 mg/ml, you need exactly 15 ml of 20 mg/ml nicotine base (1.5 bottles of 10 ml). For 6 mg/ml in a 100 ml total batch, you would need 30 ml (three full shots). To avoid calculation errors with uneven batch sizes, use a dedicated e-liquid calculator that gives you the exact millilitres for flavouring, base, and shots.

When choosing a nicotine type, you have two options. A classic Ultrabio 20mg/ml 50/50 Nicotine Shot uses freebase nicotine, delivering that familiar noticeable throat hit prized at low to medium strengths. If you prefer an option that remains smooth to inhale even at higher strengths in a pod system, an Ultrabio 20 mg/ml 50/50 Nicotine Salt Shot is the right choice. Nicotine salt has a more neutral pH level, resulting in a noticeably gentler throat hit.

Step-by-Step Guide: How to Mix Your Own E-Liquid

To mix e-liquid, start by pouring the flavour concentrate into a clean empty bottle, add the calculated amount of nicotine shots, and then top up the bottle with base. This order ensures that both flavouring and shots fit comfortably before filling up the remaining volume.

1. Preparation and Workspace

Always work on a clean, wipeable surface. Keep suitably sized empty bottles, measuring cups or finely graduated syringes, and paper towels within reach. When handling nicotine, keep your hands clean and avoid splashes on your skin or clothing.

2. Measuring the Flavour Concentrate

Check the manufacturer's recommended mixing percentage. If it is 10% and you are making a 100 ml batch, use a syringe to measure exactly 10 ml of flavour concentrate directly into the empty mixing bottle. With longfill bottles, you can skip this step as the exact amount of flavouring is already pre-filled.

3. Adding Nicotine Shots

Next, pour in the calculated number of nicotine shots. When buying a nicotine shot, choose a VG/PG ratio that matches the rest of your e-liquid base so you do not unintentionally shift the overall ratio.

4. Topping Up with Base and Shaking

Fill the bottle up to the target line with your nicotine-free e-liquid base. Seal the bottle tightly with the dropper nozzle and cap. Shake the mixture vigorously for at least one to two minutes until the liquid is filled with tiny air bubbles. This agitation initiates the homogeneous blending of the different viscosities of VG, PG, and flavour concentrate.

Steeping Time and Storage: Letting Flavours Develop Properly

Steeping allows the flavour molecules to disperse evenly and stably throughout the thicker VG/PG structure, rounding out the overall taste. Freshly shaken mixes can often taste unbalanced or slightly sharp right away.

The required steeping duration depends largely on the flavour profiles used:

  • Fruit and menthol flavours: These crisp profiles are often ready to vape within one to three days.
  • Cream, vanilla, and dessert flavours: Richer flavour compounds frequently need five to ten days to develop their full depth.
  • Tobacco and nutty notes: Complex tobacco blends often benefit from two to three weeks of steeping.

Store your finished bottles in a cool, dark place—such as a drawer or cupboard. Direct UV light and prolonged heat degrade nicotine and flavourings over time, leading to discolouration and loss of taste.

Avoiding Common DIY Mixing Mistakes

The most frequent mistakes when mixing your own e-liquid are over-dosing flavouring, choosing the wrong viscosity for your coil, and insufficient shaking before your first fill. Knowing these pitfalls saves both supplies and frustration.

More flavouring does not automatically mean better taste. Over-flavouring often leads to a muted, soapy, or harsh vape because your taste buds become overwhelmed. Always start at the lower end of the manufacturer's recommendation—you can easily add a little more later.

Another common issue is incomplete mixing. Because PG and flavour concentrates have a different density than thick VG, the liquids can slowly separate when left standing. Make sure to give your bottle a quick shake not only on day one, but also before every tank refill.

Frequently Asked Questions

How long does homemade e-liquid need to steep?

Fruity flavours usually only need one to three days, whereas creamy notes, desserts, and tobacco flavours should steep for five days to three weeks to reach their full flavour potential.

What is the difference between a standard nicotine shot and a nicotine salt shot?

A classic nicotine shot delivers a noticeable throat hit, while nicotine salt is smoother to inhale and provides a softer sensation in the throat even at higher concentrations.

Can you vape unflavoured e-liquid base on its own?

Yes, an unflavoured VG/PG base can be vaped without flavouring or nicotine. It produces odourless vapour and works well for testing new coils or resetting your palate.

How do I calculate the right amount of nicotine shots?

Divide your desired total volume in ml by 20, then multiply the result by your target strength in mg/ml. For 100 ml at 3 mg/ml, calculate: (100 / 20) × 3 = 15 ml of nicotine shot (equal to 1.5 bottles).

Last updated: November 2026 · Author: Popy

My Cart

Loading...

Customer Login

Welcome gold Create an account – claim € 5 Tick the newsletter box when you register and confirm the email – your voucher code arrives by email. No minimum order value, once per person.

Checkout as a new customer

Creating an account has many benefits:

  • See order and shipping status
  • Track order history
  • Check out faster
Loading...